
Home Window Tinting
UV Protection Window Film for Homes
UV protection window film blocks 99% or more of the ultraviolet light coming through your windows while keeping the glass close to clear. It slows fading of art, wood floors, rugs and upholstery without changing the view. We install it on Arizona homes, with clear ceramic films starting from $9.00 per square foot.
- From $9.00 per sq ft installed
- Most homes finished in a day
- XPEL Limited Lifetime residential warranty
Overview
UV protection window film for a well-furnished room
Ultraviolet light is invisible and doesn’t feel hot, so the damage it causes shows up slowly: a pale band across walnut flooring where a rug used to stop, a silk pillow that has lost its color on the side facing the window, a painting whose reds have softened. In a home with large glass and strong Arizona sun, that kind of fading can reach the things people care about most.
UV protection window film is a nearly clear film that filters ultraviolet light out of the sunlight coming through your glass. Every film on this page is published by its manufacturer as blocking 99% or more of UV. Most homeowners who choose it want the room to stay bright and the view to stay untouched while the floors, furnishings and art are better protected.
Part of our home window tinting services; also available as uv protection window film for commercial buildings.
UV and fading
UV blocking and fade reduction are different numbers
UV is a major cause of fading, but not the only one. Visible light and solar heat also break down dyes, finishes and pigments over time. That is why some manufacturers publish two figures:
UV rejection
The share of ultraviolet light the film blocks. Every film here is at 99% or better.Fade reduction
An estimate of how much the film slows fading overall, counting UV, visible light and heat together.
Solar Gard publishes Panorama HiLite 70 at more than 99% UV blocking and 46% fade reduction on 6 mm clear glass, while keeping 70% of visible light. Panorama HiLite 40 keeps 40% of visible light and is published at 68% fade reduction. That spread is honest and useful: a clear film stops almost all of the UV, but because it passes most daylight, it slows fading rather than ending it. A slightly deeper shade does more for a room that holds a collection.
Clear films
Clear UV window film that leaves the room as designed
When the goal is UV protection with the least visible change, these are the films we usually show first. The XPEL figures are published on 3 mm glass and the Solar Gard figures above on 6 mm clear glass, so the two brands are not a like-for-like comparison.
XPEL Clear View Plus 70
Keeps 72% of visible light, rejects 55% of total solar energy and reflects 8% from outside.XPEL Clear View Alloy 65
Keeps 65% of visible light, with 16% exterior reflectance for a slightly more finished look.XPEL Clear View Ceramic 60
Is a ceramic film that keeps 61% of visible light.XPEL All Season Intelligence 65
Keeps 66% of visible light and is a low-emissivity film, so it also slows heat loss in winter. Our insulating window film page covers it.XPEL Exterior Clear Performance 75
Goes on the outside of the glass and keeps 78% of visible light.Maxpro Elite Max 70
Is published by Maxpro at 69% visible light and 99% UV blocking.
All of them also reject some solar heat, a welcome side effect on a sunny elevation.
Specs
UV protection window film specs
XPEL
| Film | Visible light transmitted | Total solar energy rejected | SHGC | UV blocked | Glare reduction |
|---|---|---|---|---|---|
| Evening View 25SRP rebate eligible | 26% | 61% | 0.39 | 99% | 69% |
| Evening View 15SRP rebate eligible | 15% | 76% | 0.24 | 99% | 83% |
| Evening View 5SRP rebate eligible | 8% | 81% | 0.19 | 99% | 92% |
| Exterior Clear Performance 75 | 78% | 42% | 0.58 | 99% | 13% |
| Clear View Plus 70 | 72% | 55% | 0.45 | 99% | 20% |
Manufacturer-published values measured on 1/8" (3 mm) glass; results on your windows vary by glass type. Sources: spec sheet
Solar Gard
| Film | Visible light transmitted | Total solar energy rejected | SHGC | UV blocked | Glare reduction |
|---|---|---|---|---|---|
| Panorama HiLite 70 | 70% | 54% | 0.46 | >99% | n/a |
Manufacturer-published values measured on 1/4" (6 mm) clear glass; results on your windows vary by glass type. Sources: spec sheet
Where it matters
Where window film for UV protection matters most
Great rooms with wide-plank wood floors and wool or silk rugs
In the path of the afternoon sun.Galleries, hallways and stair landings
Where art hangs opposite a window or under a clerestory.Dining rooms with antique furniture,
Fine upholstery or a sideboard that catches the light.Libraries and studies
With leather, books and framed documents near the glass.Primary suites
With linen, drapery and upholstered headboards facing a view window.Wine rooms and display cabinets
Set behind or beside glass.
North-facing windows get less direct sun but still pass daylight with UV in it, so a room with valuable pieces can benefit even without afternoon sun.
Darker films for rooms that are fading and hot
If a room is fading and also too hot, a clear film may not be enough. Darker films block the same UV and cut more light and heat. XPEL publishes Evening View 25 at 26% visible light and 61% total solar energy rejected on 3 mm glass, and Evening View 15 and 5 go darker still. All three qualify for the SRP window film rebate on sunstruck windows of an air-conditioned home; SRP is the only Arizona utility with a window film rebate, and current amounts are at savewithsrp.com. Our solar window film page explains how to choose a shade.
How we plan a UV protection project
A UV project starts with what you want to protect, not with the windows. At the estimate we walk the house with you, and with your designer if you like, and look at where sunlight lands through the day: the rug in front of the slider, the console beside the dining window, the art wall in the gallery. Those spots tell us which panes matter most.
Then we look at the glass itself. Each window is checked for single-pane or dual-pane construction and any factory low-E coating, because that decides which films are appropriate. We hold samples of a few clear films against the glass so you can judge each one from inside and from the yard.
Some homeowners want every window done so protection is even through the house. Others start with the rooms where fading is already visible. Either way, the proposal lists each window with its film and square footage, so it is easy to add rooms later and keep the same film throughout.
Protecting furnishings during installation
On install day the crew covers floors and sills, and moves or wraps furniture near the glass. If a piece is too valuable or fragile for us to handle, tell us beforehand and we will work around it once it has been moved by whoever normally handles it. Each pane is cleaned, the film is applied and trimmed to the frame, and the room is left as we found it.
Care afterward is simple. Solar Gard’s guidance is to wait 30 days before cleaning, then use mild dish soap and water on a soft cloth, with no razor blades or scouring pads on the filmed side. If you have a window cleaning service, give them a copy of the care instructions.
Trade-offs
Does UV blocking window film work? The trade-offs
It slows fading; it doesn’t stop it
Clear films pass most of the visible light that also contributes to fading.Not every film suits every glass
Some dual-pane and low-E windows limit which films can go on the inside. We check each window first.Curing takes time
Small water pockets or a slight haze can show after installation and usually clear in a few days.
Cost
UV protection window film cost and warranty
Clear ceramic films start from $9.00 per square foot. Removal of old film adds $4.50 per square foot, and upper-floor or lift access adds 15%. You get a written proposal with the film and square footage for each window before any work starts, and most homes are finished in a day. XPEL Clear View and All Season films carry a Limited Lifetime residential warranty, and XPEL exterior films carry 5 years on the film and 2 years on labor, when an authorized dealer installs them. Our window film warranty page explains the terms.
We are licensed by the Arizona Registrar of Contractors (ROC #333727) and install across the Phoenix and Tucson metros. See home window tinting for the full residential lineup, or commercial UV protection window film for galleries, showrooms and retail. Our article on UV protection security window film is a good next read if you also want glass that holds together when broken.
UV protection window film cost per square foot
Installed prices start at $9.00 per square foot. Your written proposal is based on measured glass, film choice and access.
| Film grade | Installed price per sq ft |
|---|---|
| Clear ceramic | From $9.00 |
Prices as of October 2026, from our bid-tool customer rates. Old film removal adds $4.50 per sq ft; upper-floor or lift access adds 15%.
Related films
More home window tinting films
Guides
UV protection window film guides
Do UV blocking window films work?
Yes. Every film on this page is published by its manufacturer as blocking 99% or more of ultraviolet light. They slow fading rather than stopping it, because visible light and heat also play a part.
What is the best window film for UV protection?
If you want the glass to stay clear, a high-light film such as XPEL Clear View Plus 70 or Solar Gard Panorama HiLite 70 blocks 99% or more of UV while keeping most of the daylight. If the room is also hot, a darker solar film blocks the same UV and more heat.
What are the downsides of using window film?
Film slows fading but doesn't stop it, not every film suits every dual-pane or low-E window, and new film needs time to cure. We check your glass before recommending anything.
Is clear UV film noticeable from outside?
Very little. XPEL publishes Clear View Plus 70 at 8% exterior reflectance on 3 mm glass, so from the street the window looks much like untreated glass.
Will UV film protect my hardwood floors?
It removes nearly all of the UV that bleaches wood and floor finishes, which slows fading. Rugs and finishes can still shift slowly from visible light, so a darker film helps more in very sunny rooms.
Can UV film protect a collection of art or textiles near windows?
It removes 99% or more of the UV, which is the part of sunlight most associated with fading. For a collection, we also look at a film with a higher published fade reduction, such as Solar Gard Panorama HiLite 40 at 68% on 6 mm clear glass, and suggest you keep using shades on the brightest exposures.
Does UV window film reduce heat too?
Some. Clear films reject part of the solar energy; XPEL publishes Clear View Plus 70 at 55% total solar energy rejected on 3 mm glass. For more heat control, a darker solar film is the better tool.
Free consultation
Book a free window tinting consultation
Tell us about your glass and we'll send a written proposal.
(480) 977-6994- Arizona: ROC Lic# 333727
Licensed, factory-authorized window film installers
- Arizona: ROC Lic# 333727
- Solar Gard / Saint-Gobain authorized dealer
- Armorcoat authorized installer
- XPEL authorized dealer
- Madico SafetyShield qualified dealer
- Full XPEL VISION line installed
- 25 years of window film experience
Because we're factory-authorized, film is installed to manufacturer spec and carries the manufacturer's warranty.
