Total Protection Films
Commercial window tinting: an installer on tall ladders applying film to clerestory glass in a double-height lobby

Commercial window film by industry

School Security Window Film for Schools and Government Buildings

We install school security window film and safety film on schools, district offices and government buildings in Phoenix and Tucson. Clear security film holds broken glass together and slows entry, anchoring ties it to the frame, and solar, one-way and frosted films handle classroom heat, glare and front office privacy. Each building is surveyed before we quote.

Overview

School security window film that holds glass in place

When a school or public building calls us, the first question is usually about safety. Ordinary window glass gives way at the first hard strike and falls out of the frame, which leaves an open entry point and broken glass across a classroom or lobby. School security window film is a thick, clear polyester film bonded to the inside of the glass. When the glass breaks, the film holds the pieces together as a sheet, so the opening does not clear on the first blow.

We work on elementary and secondary schools, district offices, city and county buildings and other public facilities across the Phoenix and Tucson metros. Clients include the National School Boards Association. Our commercial window tinting overview lists every film we install.

Part of our commercial window tinting services. See every industry we serve.

What safety window film does and does not do

Safety window film and security film add time and effort to getting through glass, and they keep shards from spraying into a room when glass breaks for any reason. That is the honest promise. Film does not make glass unbreakable, and the films we install do not stop bullets. We will not describe them that way.

The clear security films we install run from 4 to 14 mil: Solar Gard Armorcoat-Clear and XPEL Security Clear. Clear film is close to invisible. XPEL publishes Security Clear 8mil at 89% visible light on 3 mm glass, so classrooms keep their daylight and views. Thicker is not always better; we match thickness to the glass and the risk. Our commercial security window film page covers the products in detail.

Anchoring shatter resistant window film to the frame

Shatter resistant window film on its own keeps broken glass together, but the weak point is the edge, where the whole filmed pane can push out of the frame. Madico does not recommend a simple daylight installation of safety film, where the film stops short of the frame, when retention is the goal. Anchoring ties the filmed glass to the frame. The systems we use:

  • Wet glazing with DOWSIL 995, a structural silicone Dow publishes at 350 psi tensile strength, bonding film to frame.
  • Madico SafetyShield GullWing, an attachment profile sized to the frame and designed to spread energy across the whole opening.
  • Madico SafetyShield FrameGard, an aluminum extrusion Madico publishes at 500 to 800 pounds per linear foot of attachment.

Madico SafetyShield test listings

Madico lists SafetyShield testing to ANSI Z97.1 safety glazing, ASTM F1642 blast mitigation, ASTM F3561 forced entry resistance after simulated active shooter, and EN 356 resistance against manual attack. Those are Madico’s published results for its system, not a certification we hold or a rating of any specific building.

A Skull Valley elementary school security film project

In July 2023 we installed clear 8 mil security film at an elementary school in Skull Valley, Arizona. The early 1950s brick building has steel-frame windows, many close to 75 years old. In the classrooms, the filmed glass is anchored with Madico SafetyShield GullWing. In the front office, we wet glazed the film to the frames with DOWSIL 995. The job covered about 1,100 square feet, took two installers and a helper four days, and was funded by a school security grant. Window Film Magazine covered it in Arizona Elementary School Upgrades Security With Film. More jobs are on our window film projects page.

Glass protection film for public buildings

City and county offices, courts and other public buildings face threats beyond an overnight break-in: angry visitors, protests and vandalism. The same clear security film and anchoring apply to entry vestibules, lobby glass and ground-floor offices. For glass that gets tagged or scratched, anti-graffiti window film is a clear sacrificial layer that is replaced instead of the glass. Our articles on impact resistant window film and security window film laws answer common questions from facilities and safety committees.

One-way film for front offices and checkpoints

Front offices and reception windows need staff to see who is approaching without putting them on display. One-way window film lets people inside see out while people outside see a mirror, as long as the outside is brighter. It reverses at night when interior lights are on. For rooms that need privacy at all hours, such as a nurse’s office or counseling room, frosted window film blocks the view day and night while passing light.

Heat and glare in classrooms

Phoenix averages about 111 days a year at 100 degrees or more, and Tucson about 68. Classrooms with big window walls get hot by afternoon, and low sun washes out interactive boards and screens. Solar film cuts heat at the glass, and anti-glare film handles rooms built around a display. The films we install for heat are published at 99% or more UV blocked, which also slows fading on finishes and displayed work. See commercial solar window film.

Some security films carry solar control too. XPEL makes 8 mil security films in tinted versions, so one film can cover safety and heat on the same glass.

Schools and public buildings in Phoenix and Tucson

We work for schools and public agencies across the Phoenix metro and the Tucson metro, on buildings that range from brick schools with original steel windows to newer offices with storefront-style glass entries. Our Phoenix commercial window tinting and Tucson commercial window tinting pages describe how we schedule work in each area.

How a school or government film project runs

Schedule a site survey
  1. STEP 1

    Survey

    We walk the building with the facilities lead, note the glass type in every opening (annealed, tempered, laminated or insulated), and check frames, gaskets and stops. Old framing can change which anchoring method fits.
  2. STEP 2

    Written proposal

    Film and anchoring by room or elevation, square footage and price, with manufacturer data sheets for safety committees, boards or grant applications.
  3. STEP 3

    Scheduling

    Installs go over breaks, weekends or after students leave. We agree the room order in advance.
  4. STEP 4

    Handoff

    Film should not be cleaned for 30 days, and wet glazing needs time to cure. We leave care instructions for custodial staff.

Cost

School window film cost

Security film and anchoring are priced per project after the survey, because frame type and the attachment method drive the cost. The price table below shows rates for the films schools use most, and our article on security window film cost explains what changes the price.

Window film cost for schools and government buildings

Installed prices start at $8.25 per square foot. Your written proposal is based on measured glass, film choice and access.

Film gradeInstalled price per sq ft
Clear ceramicFrom $9.00
Darker ceramicFrom $11.50
Solar controlFrom $8.25
SecurityFrom $9.50
Privacy frostFrom $8.25

Prices as of October 2026, from our bid-tool customer rates. Old film removal adds $4.50 per sq ft; upper-floor or lift access adds 15%.

Window film projects for schools and government buildings

See all window film projects →
  • Security window film being installed in an elementary school classroom with steel-frame windows

    Security window film in Skull Valley, AZ

    Elementary school security film

    Skull Valley, AZ · Security Window Film · 1,100 sq ft ·

    Clear 8 mil security film on the steel-frame windows of an early 1950s brick school, anchored with Madico SafetyShield GullWing in the classrooms and DOWSIL 995 wet glazing in the office. Two installers and a helper, four days, funded by a school security grant.

    Featured in Window Film Magazine: Arizona Elementary School Upgrades Security With Film

Trusted on projects for

  • Willmeng logo
  • Renaissance Hotels logo
  • National School Boards Association logo
  • Amazon logo
  • Li-Cycle logo
  • Dexcom logo
  • Camping World logo

Common questions

Questions about window film for schools and government buildings

Have a question about your glass? Ask us.

Does school security window film stop bullets?

No. The security films we install do not stop bullets, and we do not describe them that way. They hold broken glass together and slow someone trying to get through, which can buy time, and they keep shards from scattering into a classroom.

Can a school pay for security window film with grant money?

Some schools do. The Skull Valley elementary school we filmed in 2023 paid for the work with a school security grant. We do not administer grants, but we can provide the written proposal, square footage and manufacturer data sheets an application usually asks for.

Why does school security film need to be anchored to the frame?

Film alone holds the broken pieces together, but the whole filmed pane can still be pushed out of the frame. Madico does not recommend a simple daylight installation of safety film when retention is the goal. Wet glazing or a mechanical attachment ties the filmed glass to the frame.

Can security film go on old steel-frame school windows?

Often, yes. The Skull Valley school had steel-frame windows close to 75 years old. We check each frame, gasket and stop during the survey, because worn framing changes which anchoring method will work.

When do you install window film in schools?

Usually over summer, winter or spring breaks, or after students leave for the day. Film installation is quiet and needs no structural work, and we agree the room order with the facilities team in advance.

Can government building lobbies get one-way film for the reception desk?

Yes. One-way reflective film lets staff at a reception window or checkpoint see out while visitors see a mirror, as long as the outside is brighter. It reverses at night when interior lights are on, so frosted film is better where privacy is needed after dark.

Will classroom window film make rooms too dark for teaching?

Not if the film fits the room. Lighter ceramic and spectrally selective films cut heat and glare while keeping daylight; darker film is saved for west and south glass that faces interactive boards or screens.

Free consultation

Book a free window tinting consultation

Tell us about your glass and we'll send a written proposal.

(480) 977-6994
  • Arizona: ROC Lic# 333727

By submitting, you agree to receive calls and texts about your request from Total Protection Films. Msg & data rates may apply. Reply STOP to opt out. See our privacy policy.

Licensed, factory-authorized window film installers

  • Arizona: ROC Lic# 333727
  • Solar Gard / Saint-Gobain authorized dealer
  • Armorcoat authorized installer
  • XPEL authorized dealer
  • Madico SafetyShield qualified dealer
  • Full XPEL VISION line installed
  • 25 years of window film experience

Because we're factory-authorized, film is installed to manufacturer spec and carries the manufacturer's warranty.