
Commercial Window Tinting
Commercial Privacy Window Film
Commercial privacy window film limits what people can see through office, clinic and storefront glass. Frosted films diffuse the view day and night while letting light through; reflective films give daytime privacy and also cut solar heat. We install Madico and XPEL privacy films across Arizona from $8.25 per square foot.
- From $8.25 per sq ft installed
- After-hours or weekend installs
- Samples on your own glass
Overview
Commercial privacy window film for offices and clinics
In a home, privacy usually means neighbors. In a commercial building, it is a set of different needs in the same suite. A law firm wants confidential meetings behind glass walls. A dental office needs patients in the chair to feel unseen from the waiting room. A ground-floor tenant on a busy street wants people at their desks to stop feeling watched. A property manager wants a vacant suite to look tidy instead of showing an empty floor.
Privacy window film handles all of these on the glass that is already there. It is applied to the existing pane, it can be changed at lease turnover, and it avoids the cost and lead time of replacing glass or adding wall systems. For other films we install on commercial glass, see our commercial window tinting page.
Frosted or reflective
Frosted versus reflective window film for privacy
Commercial privacy film falls into two groups, and choosing the wrong one is the most common mistake we see.
Frosted and white films that diffuse the view
They scatter light so shapes and colors blur, and they work the same way day and night, from both sides. Madico publishes Frost Matte at 67% visible light transmission on 6 mm clear glass. XPEL publishes White Frost at 65% visible light transmission on 3 mm glass. For near-opaque privacy, XPEL White Out is published at 9% visible light transmission on 3 mm glass. For dedicated frost options, see our frosted window film page.
Reflective films for daytime one-way privacy
A metallic film acts like a mirror from the brighter side. During the day, people outside see a reflective surface while people inside can still see out. At night, with the lights on inside, that reverses. XPEL publishes Silver 15 at 58% exterior reflectance on 3 mm glass. Solar Gard TrueVue 5, published at 5% visible light transmission on 6 mm clear glass, is a darker option for glass that needs both privacy and strong sun control. Our one-way window film page covers this group in more detail.
By room
Office privacy window film by room type
Conference rooms and private offices
Glass-front offices and meeting rooms that need confidential discussions without closing off the floor plan.Medical and dental suites
Exam rooms, operatories, consult rooms and any glass between patient areas and the waiting room.HR, finance and legal spaces
Rooms where screens and paperwork should not be readable from the corridor.Street-level offices
Ground-floor tenants on busy streets, where a reflective film gives daytime privacy and cuts heat at the same time.Restrooms, locker rooms and break rooms
Glass in schools, gyms and workplaces that needs to stay private at all hours.Vacant suites
Property managers use privacy film to screen empty space during leasing.
Designing privacy film around how people use the room
On partitions, full-height frost is not always the best answer. A band across the glass at eye level blocks the view of people seated and standing while leaving clear glass at the top for daylight and at the bottom so the room does not feel closed in. We set band heights from the furniture layout and confirm them with your team before installing.
On exterior glass, think about when the space is in use. An office that empties at five can use a reflective film on the street side. A clinic with evening hours, or a restaurant back office used at night, needs frost or white film instead.
Mixing films is normal. A medical suite might have reflective film on the exterior glass for heat and daytime privacy, and frost on interior partitions. On a multi-story office, the property manager may want one reflective film on every floor so the exterior looks uniform, while each tenant chooses its own frost or band layout on interior glass.
Survey
Questions we ask on the survey
A short walk-through with the people who use the space usually settles the right film faster than looking at samples alone. We ask:
Who needs privacy from whom?
Patients from a waiting room, a meeting from the corridor, desks from the sidewalk. The answer decides whether you need frost or reflective film, and on which side of the glass.When is the room used?
Daytime-only spaces can use reflective film. Anything used after dark with the lights on needs frost or white film.How much daylight should stay?
Interior rooms with no windows of their own rely on borrowed light through the partition. A lighter frost or a band keeps them usable.Are there building standards?
Many landlords control what tenants put on exterior glass and on glass facing common corridors. We check with the property manager before we finalize a design.Will the layout change?
Tenants planning to move furniture or rooms soon may want simple bands that can be replaced easily.
We bring samples of each film type and hold them on your glass, in your lighting, so decision makers can compare before approving the proposal.
Specs
Commercial privacy window film specs
XPEL
| Film | Visible light transmitted | Total solar energy rejected | SHGC | UV blocked | Glare reduction |
|---|---|---|---|---|---|
| Evening View 15SRP rebate eligible | 15% | 76% | 0.24 | 99% | 83% |
| Evening View 5SRP rebate eligible | 8% | 81% | 0.19 | 99% | 92% |
| White Frost | 65% | 33% | 0.67 | 99% | 28% |
| Exterior Silver 15 | 18% | 78% | 0.22 | 99% | 81% |
Manufacturer-published values measured on 1/8" (3 mm) glass; results on your windows vary by glass type. Sources: spec sheet
Solar Gard
SRP rebate eligible| Film | Visible light transmitted | Total solar energy rejected | SHGC | UV blocked | Glare reduction |
|---|---|---|---|---|---|
| TrueVue 5 | 5% | 79% | 0.21 | >99% | n/a |
Manufacturer-published values measured on 1/4" (6 mm) clear glass; results on your windows vary by glass type. Sources: spec sheet
Madico
| Film | Visible light transmitted | Total solar energy rejected | SHGC | UV blocked | Glare reduction |
|---|---|---|---|---|---|
| Frost Matte | 67% | n/a | n/a | n/a | 25% |
Manufacturer-published values measured on 1/4" (6 mm) clear glass; results on your windows vary by glass type. Sources: spec sheet
Installing privacy film in an occupied office
Interior partition work is quiet and fast, and we typically schedule it after hours or on weekends so meetings and patient appointments carry on. Crews protect desks and equipment near the glass and leave each room ready to use. On multi-tenant buildings we coordinate access with the property manager, and we work as a subcontractor for general contractors on tenant improvements when privacy film is part of the build-out.
We are a Solar Gard / Saint-Gobain authorized dealer and Armorcoat authorized installer, install the full XPEL VISION line along with Madico and Maxpro films, and hold Arizona ROC license #333727.
Cost
Commercial privacy window film cost
Privacy frost is installed from $8.25 per square foot. Reflective films are priced by product. Other factors:
- Removal of old filmAdds $4.50 per square foot.
- Upper floor or lift accessAdds 15%.
- Bands and partial coverageUse less film than full-height coverage, but layout and cutting take time.
- Many small litesTake more labor than a few large panes.
Commercial privacy window film cost per square foot
Installed prices start at $8.25 per square foot. Your written proposal is based on measured glass, film choice and access.
| Film grade | Installed price per sq ft |
|---|---|
| Privacy frost | From $8.25 |
Prices as of October 2026, from our bid-tool customer rates. Old film removal adds $4.50 per sq ft; upper-floor or lift access adds 15%.
Every project gets a written proposal from measured glass before work starts. Solar Gard TrueVue carries a 12-year commercial warranty and XPEL White Out carries 5 years, provided an authorized dealer installs the film.
Caring for privacy film in a commercial building
Frosted and reflective films are cleaned with a soft cloth or squeegee and a non-abrasive glass cleaner after the cure period. We leave written instructions for janitorial crews, since abrasive pads and razor blades can scratch the film surface.
Leave new film alone for 30 days before the first cleaning. Some haziness in those first days is trapped moisture, and it normally fades within a few days as the weather allows. From then on, crews can wash the glass with water and a little mild dish detergent, or with a commercial glass cleaner, using only soft cloths or paper towels. Leftover tape from temporary notices lifts off with mineral spirits or rubbing alcohol on a soft cloth.
Related films
Related options
If your goal is a branded or patterned look as much as privacy, see decorative window film. For residential privacy, our home privacy window film page covers options for houses. Our guide to privacy window films in Scottsdale has more background on film types.
We install across the Phoenix metro and Tucson metro, with crews available Valley-wide. Contact us to book a site visit and see samples on your glass.
Part of our commercial window tinting services; also available as privacy window film for homes.
More commercial window tinting films
Guides
Commercial privacy window film guides
Which privacy film keeps an office private at night?
A frosted or white film. Reflective films only work when it is brighter outside than inside, so lit offices become visible after dark. Frost diffuses the view in both directions at all hours, which is why we use it for conference rooms, exam rooms and HR offices.
Can privacy film go on interior glass partitions and conference room walls?
Yes, and that is one of the most common commercial uses. Film goes on the existing partition glass, so there is no need to replace the wall system or add blinds. We usually install interior partitions after hours so meetings are not disrupted.
Is frosted film enough for a medical exam room?
For most exam and procedure rooms, a frost blocks clear views while keeping the room bright. Where the glass faces a waiting room or street at close range, we may recommend a denser white film such as XPEL White Out, which is published at 9% visible light transmission on 3 mm glass.
Can we frost only part of a glass wall?
Yes. A band at seated and standing eye level gives privacy while leaving clear glass above and below for daylight and a sense of openness. Bands can be sized to the furniture layout and the height of the people using the room.
Does reflective privacy film also reduce heat?
Yes. Metallic privacy films are also strong solar films. XPEL publishes Silver 15 at 78% total solar energy rejected on 3 mm glass. Frosted films reject much less heat, so they are chosen for privacy rather than sun control.
Can privacy film be removed when a tenant moves out?
Yes. Window film comes off with heat and scraping and leaves the glass intact, which makes it practical for leased space. Removal is priced at $4.50 per square foot if the next tenant wants something different.
Free consultation
Book a free window tinting consultation
Tell us about your glass and we'll send a written proposal.
(480) 977-6994- Arizona: ROC Lic# 333727
Licensed, factory-authorized window film installers
- Arizona: ROC Lic# 333727
- Solar Gard / Saint-Gobain authorized dealer
- Armorcoat authorized installer
- XPEL authorized dealer
- Madico SafetyShield qualified dealer
- Full XPEL VISION line installed
- 25 years of window film experience
Because we're factory-authorized, film is installed to manufacturer spec and carries the manufacturer's warranty.
