Total Protection Films
Commercial UV protection window film: Solar Gard TrueVue 15 on the tall glass atrium of a three-story Arizona office building

Commercial Window Tinting

Commercial UV Protection Window Film

Commercial UV protection window film is a nearly clear film applied to storefront, showroom and office glass to block ultraviolet light that fades merchandise, finishes and furnishings. Films we install, such as XPEL Clear View Plus 70, are published at 99% UV rejection. Clear ceramic UV films start at $9.00 per square foot installed.

  • From $9.00 per sq ft installed
  • Before opening, after close or weekends
  • Manufacturer warranty documentation

Overview

Commercial UV protection window film for stores and offices

A storefront window is a display case, and the sun works on everything in it. Fabric bleaches on one side, packaging turns pale, wood finishes change color, and artwork on a lobby wall slowly loses its contrast. In an office, the damage shows up as faded carpet along the window line and furniture that no longer matches. None of it happens overnight, which is why owners often notice it only when merchandise has to be marked down or a space has to be refinished.

UV protection window film addresses the part of sunlight that does much of that damage, without making the glass look tinted. For other films we install on commercial glass, see our commercial window tinting hub.

UV blocking

How much UV does window film block?

Ultraviolet light is invisible, so a clear film can block nearly all of it and still look like plain glass. Every film on this page is published by its manufacturer at 99% UV rejection or more. Solar Gard publishes Panorama HiLite 70 at more than 99% UV rejection on 6 mm clear glass. XPEL publishes Clear View Plus 70 at 99% on 3 mm glass. Maxpro publishes Elite Max 70 at 99%.

UV is not the only cause of fading. Visible light and solar heat play a part too, so no film eliminates fading. That is why Solar Gard also publishes a fade reduction figure, which accounts for more than UV alone. Panorama HiLite 70 is published at 46% fade reduction on 6 mm clear glass. Where fading protection matters more than keeping glass clear, a darker film does more, and we discuss that trade-off below.

Where it's used

UV blocking window film for retail, showrooms and lobbies

  • Retail storefronts and boutiques

    Clothing, shoes, books and packaged goods in window displays.
  • Furniture, flooring and design showrooms

    Upholstery, rugs, wood and samples that sit near the glass all day.
  • Galleries and lobbies with art

    Prints, textiles and photographs on walls that catch daylight.
  • Offices

    Carpet, wood finishes, desks and conference furniture along glass walls.
  • Medical and dental waiting rooms

    Upholstered seating and finishes that would otherwise need replacing sooner.
  • Restaurants and hotels

    Booth fabric, banquettes and window-side finishes.
  • Schools and libraries

    Reading areas, book stacks and student work near large windows.

Film options

Transparent UV film options for storefront glass

Most commercial UV projects use a high-transmission film so the building and the displays look the same as before. The options differ in how much heat they also reject.

  1. XPEL Clear View Plus 70

    XPEL Clear View Plus 70 is published at 72% visible light transmission, 55% total solar energy rejected and 8% exterior reflectance on 3 mm glass. It suits storefronts that want UV protection with some heat reduction.

  2. Solar Gard Panorama HiLite 70

    Solar Gard Panorama HiLite 70 is published at 70% visible light transmission and 54% total solar energy rejected on 6 mm clear glass, with 8% exterior reflectance.

  3. XPEL Clear View Ceramic 60 and Alloy 65

    XPEL Clear View Ceramic 60 and XPEL Clear View Alloy 65 are slightly darker clear options, published at 61% and 65% visible light transmission on 3 mm glass.

  4. XPEL All Season Intelligence 65

    XPEL All Season Intelligence 65 is published at 66% visible light transmission with a U-factor of 0.61 and an emissivity of 0.09 on 3 mm glass. It is a choice where the owner also wants a low-emissivity film.

Comparing data across brands

XPEL tests on 3 mm glass and Solar Gard on 6 mm clear glass, so we present each film’s data with its own test glass rather than ranking them against each other.

Specs

Commercial UV protection window film specs

XPEL

FilmVisible light transmittedTotal solar energy rejectedSHGCUV blockedGlare reduction
Evening View 25SRP rebate eligible26%61%0.3999%69%
Evening View 15SRP rebate eligible15%76%0.2499%83%
Evening View 5SRP rebate eligible8%81%0.1999%92%
Exterior Clear Performance 7578%42%0.5899%13%
Clear View Plus 7072%55%0.4599%20%

Manufacturer-published values measured on 1/8" (3 mm) glass; results on your windows vary by glass type. Sources: spec sheet

Solar Gard

FilmVisible light transmittedTotal solar energy rejectedSHGCUV blockedGlare reduction
Panorama HiLite 7070%54%0.46>99%n/a

Manufacturer-published values measured on 1/4" (6 mm) clear glass; results on your windows vary by glass type. Sources: spec sheet

When the glass also takes hard sun

A west-facing showroom may need more than UV protection. Darker films do more to cut heat and the visible light that also fades goods. XPEL publishes Evening View 25 at 26% visible light transmission and 61% total solar energy rejected on 3 mm glass. The trade-off is a darker, more reflective look from the street, which may not suit a store that relies on window displays. Our solar window film page covers those options.

Exterior film for hard-to-reach glass

Some storefront glass sits behind built-in casework or fixed displays. XPEL Exterior Clear Performance 75 is made for the outside face of the glass and is published at 78% visible light transmission and 99% UV rejection on 3 mm glass.

UV rejection and fade data for facilities teams

Facilities managers, store planners and interior designers often need to document why a film was chosen. For every film in a proposal, we supply the manufacturer’s published visible light transmission, exterior reflectance, total solar energy rejected, SHGC and UV rejection, with the test glass named, plus the fade reduction figure where the manufacturer publishes one. Owners with several locations can use that data to set one standard film for every storefront, so all stores look the same from the street and new sites can be specified without a fresh review.

Glass checks before we install

Clear UV films are compatible with most commercial glass, but we still check each opening on the survey. We note whether the glass is single pane or insulated, tempered or annealed, and whether it already carries a coating or an older film. Insulated units from some manufacturers carry guidance on which films may be applied, and we check that before recommending a product. Any older film is removed so the new film bonds to clean glass. We also look at how close fixtures, displays and shelving sit to the windows, because that sets how much has to be moved on install day and how long each section takes.

Installing UV film around business hours

Schedule a site survey
  1. STEP 1

    Survey

    We measure the glass, note glass type and existing film, and check what displays or fixtures sit near the windows.
  2. STEP 2

    Proposal

    You get a written proposal with film options, manufacturer data, square footage and schedule.
  3. STEP 3

    Install

    We work before opening, after close or on weekends, and protect merchandise near the glass.
  4. STEP 4

    Closeout

    You receive the manufacturer warranty documentation for the film installed, which XPEL honors only for authorized dealer installs.

We work for retailers, property managers and general contractors, and hold Arizona ROC license #333727.

Cost

Commercial UV window film cost

Clear ceramic UV films are installed from $9.00 per square foot. Removal of old film adds $4.50 per square foot, and upper floor or lift access adds 15%. Large panes cost less per square foot to install than many small lites.

Commercial UV protection window film cost per square foot

Installed prices start at $9.00 per square foot. Your written proposal is based on measured glass, film choice and access.

Film gradeInstalled price per sq ft
Clear ceramicFrom $9.00

Prices as of October 2026, from our bid-tool customer rates. Old film removal adds $4.50 per sq ft; upper-floor or lift access adds 15%.

Cleaning UV film in a store or office

Clear UV film looks like bare glass, which makes it easy for a cleaning crew to forget it is there. The first rule is time: the film should go 30 days after installation without being cleaned. If the glass looks slightly cloudy during that stretch, that is moisture still drying under the film, and it usually clears in a few days depending on the weather. For routine cleaning after that, plain water with mild dishwashing detergent or a commercial glass cleaner is fine, applied with soft cloths or paper towels. Stores that tape signs and promotions to the glass can take off the leftover adhesive with mineral spirits or alcohol on a soft cloth. We hand the store manager a care sheet for the window cleaning service.

Related films

UV film also pairs well with security window film, since clear security films block UV too. For homes, see our home UV protection window film page, and our article on UV protection security window film covers combining both.

We install across the Phoenix metro and Tucson metro, with crews available Valley-wide. Contact us to schedule a survey.

Part of our commercial window tinting services; also available as uv protection window film for homes.

More commercial window tinting films

Service areas

Commercial UV protection window film installation by city

All service areas →

Common questions

Commercial UV protection window film questions

Have a question about your glass? Ask us.

Does clear UV film change how merchandise looks through the window?

Very little. High-transmission films keep displays visible from the sidewalk. Solar Gard publishes Panorama HiLite 70 at 70% visible light transmission and 8% exterior reflectance on 6 mm clear glass, so the storefront still reads as clear glass.

Will UV film stop all fading in a showroom?

No film stops fading completely. UV is one cause, but visible light and heat also fade materials. Solar Gard publishes a fade reduction figure for its films, for example 46% for Panorama HiLite 70 on 6 mm clear glass, which reflects all of those causes together.

Can UV film be installed over an existing film?

No. New film needs to bond to clean glass, so any existing film is removed first. Removal is priced at $4.50 per square foot, and it is often worth doing anyway on older film that has faded or bubbled.

Can UV film go on glass we cannot reach from inside?

Yes. XPEL Exterior Clear Performance 75 is made for the outside face of the glass, for example behind built-in displays. XPEL publishes it at 78% visible light transmission and 99% UV rejection on 3 mm glass.

How disruptive is a UV film install for a retail store?

We schedule around trading hours, usually before opening or after close, and move displays only as far as needed to reach the glass. Installation is quiet and needs no structural work.

What warranty applies to UV film on a commercial building?

On commercial buildings, XPEL Clear View and All Season films carry a 15-year XPEL warranty, and XPEL exterior films carry 5 years on the film and 2 years on labor. Coverage requires an authorized dealer install.

Free consultation

Book a free window tinting consultation

Tell us about your glass and we'll send a written proposal.

(480) 977-6994
  • Arizona: ROC Lic# 333727

By submitting, you agree to receive calls and texts about your request from Total Protection Films. Msg & data rates may apply. Reply STOP to opt out. See our privacy policy.

Licensed, factory-authorized window film installers

  • Arizona: ROC Lic# 333727
  • Solar Gard / Saint-Gobain authorized dealer
  • Armorcoat authorized installer
  • XPEL authorized dealer
  • Madico SafetyShield qualified dealer
  • Full XPEL VISION line installed
  • 25 years of window film experience

Because we're factory-authorized, film is installed to manufacturer spec and carries the manufacturer's warranty.