
Commercial Window Tinting
Commercial Frosted Window Film
Commercial frosted window film is a translucent film that turns clear office glass into an etched-glass look, blocking clear sight lines while still passing daylight. Businesses use it on conference rooms, glass partitions, exam rooms and storefronts. We install it across Arizona from $8.25 per square foot, often after hours.
- From $8.25 per sq ft installed
- After-hours or weekend installs
- 5-year XPEL warranty on frost films
Overview
Commercial frosted window film for glass walls
Glass walls make offices feel open, but they also put every conversation, screen and patient on display. Frosted window film solves that without new partitions. It is a translucent film applied to the existing glass that gives it the look of sandblasted or acid-etched glass. Light passes through; clear images do not.
For property managers and tenants, the appeal is speed and flexibility. Frosting a run of glass partitions is a short installation, it involves no construction, and it can be changed later if the floor plan changes. It is one of the most requested films in our commercial window tinting work.
Part of our commercial window tinting services.
Where it's used
Frosted window film for offices, clinics and storefronts
Conference rooms
Full frost for confidential meetings, or a band at seated eye level so the room still reads as part of the open office.Private offices with glass fronts
Screens the desk and the monitor from people walking by.Medical and dental suites
Exam rooms, consultation offices, door lites and the lower part of street-facing windows.Restrooms, locker rooms and wellness rooms
Any glass where privacy is required rather than preferred.Storefronts and service counters
A frosted band that hides back-of-house areas, storage or a work area from the street while keeping the upper glass clear.Schools and public buildings
Office windows, classroom door lites and glass that faces a corridor.Glass-walled lobbies
Screening a security area or a mechanical space without blocking light into the lobby.
Coverage
Frosted privacy film coverage: full panes, bands or patterns
Full coverage gives the most privacy and the cleanest look on a partition wall. A band, usually set to block seated or standing eye level, keeps sight lines open above and below so the space does not feel closed in. Cut patterns, such as stripes, gradients, lettering or a simple logo, let the frost double as signage or brand detail.
Building codes and life safety rules often call for some marking on large glass panels so people do not walk into them. A frosted band at the right height can serve that purpose, and we can work with your architect or contractor on placement.
Options
Frosted glass window film options we install
We install frosted films from XPEL and Madico. Each has a slightly different look and light level:
XPEL White Frost
Is the classic frosted-glass appearance. XPEL lists it at 65% visible light transmission and 99% UV rejection on 3 mm glass.XPEL Dusted Crystal
Is a lighter, softer frost for glass where you want privacy with as little change in brightness as possible. XPEL lists it at 86% visible light transmission on 3 mm glass, with 35% UV rejection.Madico Frost Matte
Is a smooth matte frost. Madico publishes it at 67% visible light transmission, measured on 6 mm clear glass, so that figure is not a direct comparison with the XPEL numbers above.
If the glass also needs to protect furniture, flooring or merchandise from fading, White Frost has far more UV rejection than Dusted Crystal. For glass that needs UV protection without any frosting at all, see our UV protection window film page.
We bring samples to the site so you can hold them against your own glass and lighting, which is the most reliable way to choose between them.
Specs
Commercial frosted window film specs
XPEL
| Film | Visible light transmitted | Total solar energy rejected | SHGC | UV blocked | Glare reduction |
|---|---|---|---|---|---|
| Dusted Crystal | 86% | 17% | 0.83 | 35% | 4% |
| White Frost | 65% | 33% | 0.67 | 99% | 28% |
Manufacturer-published values measured on 1/8" (3 mm) glass; results on your windows vary by glass type. Sources: spec sheet
Madico
| Film | Visible light transmitted | Total solar energy rejected | SHGC | UV blocked | Glare reduction |
|---|---|---|---|---|---|
| Frost Matte | 67% | n/a | n/a | n/a | 25% |
Manufacturer-published values measured on 1/4" (6 mm) clear glass; results on your windows vary by glass type. Sources: spec sheet
Frosted film versus one-way and reflective privacy film
Frosted film is not the only way to add privacy on commercial glass. Reflective films give a view out during the day but depend on the outside being brighter than the inside, which limits them at night. Frost has no such limit: it obscures the view in both directions at any hour, but you also give up the view out. If a client-facing office needs to see the street, our one-way window film page explains how reflective privacy works and where it falls short. For a broader comparison, see commercial privacy window film.
Installing frosted film in an occupied office
Frosted film is applied to the interior surface of the glass, so the work happens inside your space. On a typical project we:
- STEP 1measure each pane and confirm coverage, band heights and any cut patterns;
- STEP 2send a written proposal with the film, layout and price;
- STEP 3schedule the install by room, suite or floor, including after hours when meetings cannot move;
- STEP 4clean the glass, apply the film and trim it to the frame.
There is no dust and very little noise, so neighboring rooms can keep working. The film needs time to cure after installation, and a slight haze is normal while moisture dries out.
Changes, rebrands and tenant turnover
Leased space changes hands, and floor plans change with it. Because frosted film comes off without damaging the glass, a landlord can return a suite to clear glass between tenants, or a new tenant can replace a former occupant’s logo with its own. When old film has to be removed first, that adds $4.50 per square foot.
Before you order
Questions to settle before you order
A short list of decisions makes the site survey faster and the proposal more accurate:
Who needs privacy from whom?
A conference room screened from the open office needs different coverage than an exam room screened from a parking lot.Seated or standing?
Band heights depend on whether the people you are screening sit at desks, stand at a counter or walk past in a corridor.How much light can you give up?
Rooms with no exterior windows rely on borrowed light through the partition, which points toward a lighter frost.Is there branding involved?
A logo or lettering cut into the frost needs artwork, and we confirm the layout with you before cutting.Who signs off?
In leased buildings, the landlord or property manager may need to approve film on storefront or common-area glass.
Built for multi-tenant and institutional buildings
Property managers often use frosted film as a standard finish. A consistent frost on every suite’s entry glass gives a building a uniform look from the corridor, and new tenants can add their own name or logo in the same material. Schools and public buildings use it on office glass, door lites and corridor windows where staff need light but not an audience. Because the work is quiet and clean, we can frost a whole floor of partitions over a weekend or across several evenings without moving tenants out.
If a frosted finish needs more pattern or brand detail than a cut design can give, our commercial decorative window film and custom graphics and wall murals pages cover etched-look finishes and printed artwork for the same partitions, doors and storefront glass.
Cost
Commercial frosted window film cost
Our installed rates for privacy frost start at $8.25 per square foot. Price depends on total area, the size and number of panes, cut patterns or custom layouts, old film removal and access. Upper floor or lift access adds 15%. Interior partitions on ground floors are usually the simplest work to price; tall lobby glass and custom cut graphics take more time.
Every project gets a written proposal based on measured glass before work starts, with the film, layout and price for each area. If you are comparing several looks, we can price alternates side by side. XPEL White Frost and Dusted Crystal come with a 5-year XPEL warranty on commercial installs by an authorized dealer.
Commercial frosted window film cost per square foot
Installed prices start at $8.25 per square foot. Your written proposal is based on measured glass, film choice and access.
| Film grade | Installed price per sq ft |
|---|---|
| Privacy frost | From $8.25 |
Prices as of October 2026, from our bid-tool customer rates. Old film removal adds $4.50 per sq ft; upper-floor or lift access adds 15%.
Related films
More commercial window tinting films
Guides
Commercial frosted window film guides
Does frosted film still let daylight reach interior offices?
Yes. That is the main reason offices choose it over blinds. XPEL lists White Frost at 65% visible light transmission and Dusted Crystal at 86% on 3 mm glass, so rooms behind a frosted partition stay bright.
Can frosted film be cut into stripes, bands or a logo?
Yes. Frost can cover a whole pane, run as a band at eye level, or be cut into stripes, lettering or a simple logo. For printed graphics and colors, see our decorative window film page.
Does frosted film keep a room private at night?
Frosted film scatters light in both directions, so it does not reverse at night the way reflective one-way film does. With a bright light directly behind the glass, people outside may see shapes and movement, but not detail.
Is frosted film a good fit for exam rooms and treatment areas?
It is one of the most common uses we see in medical and dental suites. Frost on interior glass, door lites and street-facing windows blocks clear views into the room while keeping the space bright.
How should staff clean frosted film on glass walls?
Use a soft cloth or squeegee with a mild, non-abrasive glass cleaner. Avoid scrapers, razor blades and abrasive pads, which can scratch the film surface.
Can frosted film be removed when a tenant moves out?
Yes. Film can be removed from the glass without replacing it, which makes frost a practical choice for leased space. Removing old film adds $4.50 per square foot to a new install.
Can you match the same frost across several floors or suites?
Yes. We record the film used on each job, so a later phase or a new suite on another floor can be finished in the same product and look.
Free consultation
Book a free window tinting consultation
Tell us about your glass and we'll send a written proposal.
(480) 977-6994- Arizona: ROC Lic# 333727
Licensed, factory-authorized window film installers
- Arizona: ROC Lic# 333727
- Solar Gard / Saint-Gobain authorized dealer
- Armorcoat authorized installer
- XPEL authorized dealer
- Madico SafetyShield qualified dealer
- Full XPEL VISION line installed
- 25 years of window film experience
Because we're factory-authorized, film is installed to manufacturer spec and carries the manufacturer's warranty.
