Commercial Window Tinting
Commercial Building Wraps and Exterior Films
Exterior and building envelope wraps change how a commercial building looks from the street without new cladding or new glass. We install three kinds: printed graphic wraps on walls and windows, architectural finish films that reface doors, columns and panels, and opaque spandrel film on exterior glass. Graphics are printed by our print partner, and our film crews install everything after a site visit.
Overview
Building wraps for commercial exteriors
A building’s exterior is its biggest sign. Faded panels, mismatched glass, dated door frames and blank walls all tell people something about the business inside. Replacing cladding or glass fixes that, but it takes permits, contractors, lead time and a budget most tenants and owners do not have.
Exterior films do a lot of the same work at a fraction of the disruption. They go on over the surfaces that are already there, they can be changed when a tenant or a brand changes, and the building stays open while we work. We group them into three kinds of work, each covered below. It is part of our commercial window tinting services for property managers, building owners, tenants and general contractors across Arizona.
A note on the name: in construction, “building wrap” also means the weather barrier installed under siding. That is not what we do. Our wraps are films applied to the finished outside of a building.
Part of our commercial window tinting services.
Printed wraps
Printed building wrap advertising and graphics
Printed building wraps turn a wall, a set of windows or a whole facade into a large-format graphic. Businesses use them for brand walls, grand openings, leasing banners on vacant buildings, construction-site screening and event promotion.
- Wall wraps are printed adhesive films applied directly to smooth walls, panels and parapets.
- Window wraps use perforated window film, so the printed image covers the glass from outside while people inside keep their view out during the day.
- Mesh banners hang in front of a facade or scaffold instead of bonding to it. The open weave lets wind pass through, which matters on large, exposed surfaces.
Our print partner produces the graphics to the sizes we measure on site, and our crews install them. You provide the artwork or brand files, and we give exact dimensions, seam positions and the areas around windows, doors and fixtures that the art has to work around. For interior walls, murals and storefront window graphics, see custom graphics and wall murals.
Sign rules to check before you order
A wrap that carries a logo or a message can count as a sign under a city’s sign code, and many Arizona cities limit the size and placement of signs. Landlords and owners’ associations often have their own rules. Checking first avoids printing a graphic you cannot put up.
Finish films
Architectural finish films for doors, columns and panels
Architectural finish films are adhesive films printed or embossed to look like wood grain, brushed or anodized metal, stone, concrete or a solid color. They reface surfaces instead of replacing them. Typical exterior uses include:
Storefront frames and entry doors
That have faded or no longer match the brand.Columns, soffits and fascia panels
Around entrances.Metal and composite panels
That have chalked or discolored in the sun.Elevator doors, lobby walls and reception desks
On the inside of the same project.
Finish films need a smooth, sound surface. We check each surface for adhesion, flatness and damage first, and we use exterior-rated films for outdoor work, since interior finish films are not made for direct sun and weather. Deeply textured, flaking or rusted surfaces need repair before any film goes on.
Spandrel glass film and exterior window film
Glass is a large share of most commercial facades, and it is where mismatches show most. Two kinds of film address it:
Opaque spandrel film
Turns clear glass solid black or white to hide slab edges, ceiling plenums, equipment and back rooms, and to match existing spandrel panels. It has its own page: blackout and spandrel window film.Exterior window films
Go on the outside face of vision glass to change its color and reflectance, cut heat and even out a facade where some panes were replaced. XPEL warrants its exterior films for 5 years on the film and 2 years on labor. For heat control without changing the look much, see commercial solar window film.
Glass on the outside of a building takes the full Arizona sun, so the film has to suit the glass. A dark, opaque film absorbs most of the solar energy that hits it and heats the pane. The glass industry’s guidance is that spandrel glass should be heat-treated because of that heat and the uneven temperatures between the center and the edges of a pane. We check the glass type and the film maker’s film-to-glass guidance before recommending a film for exterior glass.
Exterior film or new cladding and glass?
Owners usually come to us after pricing the alternative. Recladding a wall or replacing glass is permanent, which is the point when a building needs structural or weather repairs. When the problem is appearance, the comparison changes. Replacement means permits, several trades, lead time on materials and work zones around an occupied building. A film goes on over the existing surface with far less site work and leaves the original material underneath. It can also come off again, which matters on leased buildings, where a tenant’s brand wall or a leasing banner is only meant to last as long as the lease or the campaign. Where a surface is too damaged for film, we say so in the proposal rather than covering a problem that will show through.
Arizona sun
How exterior wraps hold up in Arizona sun
Exterior films in Arizona deal with intense sun, high surface temperatures and dust. That shapes how we plan the work:
Outdoor-rated materials only
For exterior surfaces, with the manufacturer’s stated outdoor life in the proposal.Surface temperature
Affects how adhesives go on. Summer installs on sunny walls are scheduled for the cooler part of the day or the shaded side first.Orientation matters
South and west faces age faster than north faces, so the same graphic can last different lengths of time on different sides of one building.Cleaning matters
Too: pressure washing and harsh cleaners can damage film edges.
Caring for exterior films
Exterior film is cleaned along with the rest of the facade, so the maintenance crew needs to know what it can take. New film should not be cleaned for the first 30 days after installation. After that, use mild dishwashing detergent and water, or a commercial glass cleaner on glass films, with soft cloths or paper towels only. Keep pressure washers and harsh cleaners away from film edges. We give a copy of the care instructions to the property manager at closeout so it can be passed to the window cleaning or facade maintenance contractor.
How it runs
How an exterior wrap project runs
- STEP 1
Site visit
We measure the surfaces, photograph them, note the height and access, and check the condition of each wall, panel and pane. - STEP 2
Material and glass check
We match each surface to a film and tell you plainly where a surface needs repair or a different product. - STEP 3
Artwork and sizing
For printed wraps, with exact dimensions and seams. - STEP 4
Written proposal
It lists each surface, the material, the manufacturer’s warranty or stated outdoor life, access equipment and the schedule. - STEP 5
Installation,
Usually with the building open, using lifts where the height calls for them.
Pricing
Exterior wrap pricing
Exterior wraps are quoted per project. Square footage, printing, the surfaces, height and lift access, and any removal of old graphics, film or coatings all affect the total. For how these products fit with the rest of a building’s glass, see our guide to architectural window films and the commercial window tint guide. Finished work is in our project gallery.
Related films
More commercial window tinting films
Guides
Commercial exterior and building envelope wraps guides
Service areas
Commercial exterior and building envelope wraps installation by city
All service areas →Common questions
Commercial exterior and building envelope wraps questions
Have a question about your glass? Ask us.
Is this the same as house wrap?
No. House wrap is the weather barrier sheet installed under siding during construction. Our wraps are films applied to the finished outside of a building: printed graphics, finish films and glass films.
How long does an exterior building wrap last in Arizona?
It depends on the film, the print, the laminate and which way the surface faces. Sun is the main thing that ages exterior graphics, and a south or west wall in the Valley gets a lot of it. We specify outdoor-rated materials for exterior work and give you the manufacturer's stated outdoor life for the products in your proposal.
Do I need a permit for a building wrap?
Possibly. A printed wrap that carries a logo or message can count as a sign under a city's sign code, and many Arizona cities limit the size and placement of signs. Check with the city's planning or sign permit office, and with your landlord or association, before ordering the print.
Can a building wrap cover windows?
Yes, with perforated window film. It carries the printed image across the glass while people inside can still see out during the day. A solid wrap over glass would block the view and the daylight.
What is an architectural finish film?
A printed or embossed adhesive film that looks like wood, metal, stone or a solid color. It is applied over doors, frames, columns, panels and other smooth surfaces to change their finish without replacing them. Exterior-rated versions are made for outdoor surfaces.
Can old spandrel or tinted glass be changed without replacing it?
Often. Opaque spandrel film can turn clear panes solid to match existing panels, and exterior window films can change the color and reflectance of vision glass. We check the glass type first, because dark films absorb a lot of solar energy.
How are building wraps priced?
Per project, after a site visit. Square footage, printing, the surfaces, height and lift access, and any removal of old graphics or film all affect the total.
Free consultation
Book a free window tinting consultation
Tell us about your glass and we'll send a written proposal.
(480) 977-6994- Arizona: ROC Lic# 333727
Licensed, factory-authorized window film installers
- Arizona: ROC Lic# 333727
- Solar Gard / Saint-Gobain authorized dealer
- Armorcoat authorized installer
- XPEL authorized dealer
- Madico SafetyShield qualified dealer
- Full XPEL VISION line installed
- 25 years of window film experience
Because we're factory-authorized, film is installed to manufacturer spec and carries the manufacturer's warranty.
