Total Protection Films
Home privacy window film frosting a shower window in a dark-tiled luxury bathroom

Home Window Tinting

Privacy Window Film for Homes

Privacy window film for homes blocks the view into a room while daylight still comes through. Frosted films obscure glass day and night, and reflective films give daytime privacy on view glass. We install both on Arizona homes, with privacy frost from $8.25 per square foot and a written proposal before any work begins.

  • From $8.25 per sq ft installed
  • Samples viewed from both sides
  • Most homes finished in a day

Overview

Privacy window film for homes built around glass

Homes built around glass raise a particular question. The walls of sliders, the pocket doors that open a great room to the patio, the clerestories and the tall entry glass are why the house feels the way it does, and covering them with fabric undoes much of that. Yet the same glass can leave a primary bath, a dressing room or a home office in plain view of a neighboring lot, a golf course path or the street.

Privacy window film answers that without drapery. It bonds to the glass, has no hardware, and can cover a whole pane or only the part that lines up with an unwanted sightline. There are two kinds, and they behave very differently.

Part of our home window tinting services; also available as privacy window film for commercial buildings.

Film types

Frosted privacy film and one way privacy film

Frosted film turns clear glass translucent. Daylight still enters, shapes blur, and detail disappears from both sides at any hour. Madico publishes Frost Matte at 67% visible light on 6 mm clear glass, and XPEL publishes White Frost at 65% visible light on 3 mm glass, so a frosted bath or dressing room stays bright. Where glass should be fully hidden, XPEL White Out is a solid white film published at 9% visible light on 3 mm glass.

Reflective film stays see-through from the dimmer side and reads as a mirror from the brighter one. By day the outdoors is brighter, so someone outside sees a reflection while you keep the view. XPEL publishes Silver 15 at 17% visible light and 58% exterior reflectance on 3 mm glass. Dual-reflective films such as XPEL Blend DR 17 are designed to look less mirrored from inside the room, which matters when the view out is the point of the window.

Day and night privacy: what changes after sunset

Reflective privacy depends on which side of the glass has more light. Once the sun is down and the lamps are on, the effect reverses: people outside can see in, and the glass shows you your own reflection. We explain this at every estimate, because it is the most common surprise with privacy film.

So the choice follows when you need privacy. A great room that faces the street mostly matters in daylight, and a reflective or dual-reflective film handles that while also cutting heat. A primary bath, a bedroom or a dressing room that needs privacy after dark should get frosted film, or shades for the evening hours.

Rooms

Bathroom privacy film and other rooms to screen

  • Primary baths and soaking tubs

    Set against a window, especially where a neighbor’s second floor looks down.
  • Entry glass, sidelights and pivot doors,

    So the view from the front walk stops at the foyer.
  • Dressing rooms and closets

    With windows, where fabric would block the light you want.
  • Home offices

    Where a monitor or a video call faces the glass.
  • Side-yard windows

    That look across a narrow gap at the house next door.
  • Glass on interior doors,

    Such as a wine room, a gym or a pantry.
  • Upper clerestories and transoms

    That can’t be reached for daily shade adjustments.

Partial coverage often works better than full. A frosted band across the lower part of a bath window blocks the sightline from the yard and keeps the sky, the mountains or the treetops above it. We cut film to the height you choose, and the edge stays straight and clean.

Privacy home window tinting that also cuts heat

On west and south view glass, a dark or reflective film can give daytime privacy and solar control together. XPEL publishes Evening View 15 at 15% visible light with 76% of total solar energy rejected on 3 mm glass, and Evening View 5 at 8% visible light with 81% rejected. Solar Gard TrueVue 5 is published at 5% visible light on 6 mm clear glass. All three qualify for SRP’s window film rebate when installed on east-, south- or west-facing windows of an air-conditioned home for an SRP customer. APS and TEP do not currently offer a window film rebate. SRP’s current amounts are at savewithsrp.com, and our solar window film page covers heat control in depth.

Exterior films go on the outside face of the glass. XPEL Exterior Blend DR 7 is published at 5% visible light and 64% exterior reflectance on 3 mm glass, among the darkest daytime privacy options we install. XPEL Exterior Silver 15 is a lighter exterior choice at 18% visible light.

Choosing

Choosing privacy film room by room

These pairings are where most of our privacy recommendations start:

  1. Primary bath or bedroom, privacy day and night

    Frosted film such as White Frost or Frost Matte, full height or a lower band.
  2. Great room or view wall facing a street or neighbor, privacy by day

    A dual-reflective film, which also softens glare on the floor and furniture.
  3. Entry door and sidelights

    Frosted film, so the foyer keeps its light and visitors can’t see past the door.
  4. A window that faces a blank wall or a neighbor’s window and should be fully blocked

    XPEL White Out.
  5. West glass facing the street

    A dark solar film such as Evening View 15, which handles heat and daytime privacy together.

We bring samples of each and ask you to look at them from both sides. Step outside, look back at the house, then check the view from your chair. That is the quickest way to see what each film does on your own glass.

Specs

Privacy window film specs

XPEL

FilmVisible light transmittedTotal solar energy rejectedSHGCUV blockedGlare reduction
Evening View 15SRP rebate eligible15%76%0.2499%83%
Evening View 5SRP rebate eligible8%81%0.1999%92%
White Frost65%33%0.6799%28%
Exterior Silver 1518%78%0.2299%81%

Manufacturer-published values measured on 1/8" (3 mm) glass; results on your windows vary by glass type. Sources: spec sheet

Solar Gard

SRP rebate eligible
FilmVisible light transmittedTotal solar energy rejectedSHGCUV blockedGlare reduction
TrueVue 55%79%0.21>99%n/a

Manufacturer-published values measured on 1/4" (6 mm) clear glass; results on your windows vary by glass type. Sources: spec sheet

Madico

FilmVisible light transmittedTotal solar energy rejectedSHGCUV blockedGlare reduction
Frost Matte67%n/an/an/a25%

Manufacturer-published values measured on 1/4" (6 mm) clear glass; results on your windows vary by glass type. Sources: spec sheet

Reflective film, the street view and your HOA

Frosted film looks white or etched from outside, much like the obscured glass builders already use in many baths. Reflective film looks like a mirror. Many owners of architect-designed homes would rather the glass read as untreated from the street, and some HOAs restrict highly reflective glass on front elevations. We can provide samples and product data for your architect or architectural committee, and we can steer street-facing glass toward frost or dual-reflective film rather than silver.

For a frost with a design element, such as a band, a border or a texture on shower glass, our decorative window film page covers the finishes we install.

How we install privacy film in a finished home

Get a free consultation

Our crew protects floors, rugs and furnishings near each window before work starts, and moves pieces only with your direction. Each pane is cleaned, the film is applied wet and trimmed to the frame. Frosted films can look slightly mottled for a short time while the adhesive cures, and reflective films may show small water pockets. Both usually clear in a few days, depending on the weather. Most homes are finished in a day.

Solar Gard’s care guidance is to wait 30 days before cleaning, then use mild dish soap and water with a soft cloth. Keep blades and scouring pads off the filmed side so the finish stays even.

Cost

Privacy window film cost and warranty

Privacy frost starts from $8.25 per square foot. Reflective and dark solar films are priced by film, and the proposal lists each one with its square footage. Removing old film adds $4.50 per square foot, and upper-floor or lift access, common with clerestories, adds 15%. For residential warranties, Solar Gard TrueVue and XPEL Blend DR are Limited Lifetime residential, XPEL White Out is 5 years, and XPEL exterior films are 5 years on the film and 2 years on labor, all with an authorized dealer install. Our window film warranty page explains how claims work.

The full residential lineup is on the home window tinting page. For offices, clinics and storefronts, see commercial privacy window film. For more background, read our privacy window films guide.

Privacy window film cost per square foot

Installed prices start at $8.25 per square foot. Your written proposal is based on measured glass, film choice and access.

Film gradeInstalled price per sq ft
Privacy frostFrom $8.25

Prices as of October 2026, from our bid-tool customer rates. Old film removal adds $4.50 per sq ft; upper-floor or lift access adds 15%.

Common questions

Privacy window film questions

Have a question about your glass? Ask us.

Can privacy film go on dual-pane or low-E windows?

Usually, yes, but some dual-pane and low-E units have limits on which films are safe to apply, so we check the glass type before recommending one. With an authorized dealer install, XPEL and Solar Gard cover glass breakage for 5 years and dual-pane seal failure for 3 years on approved film-to-glass applications, up to $500 per window.

Does privacy film work at night?

Frosted film does, because it obscures the glass from both sides at all hours. Reflective film only works while it is brighter outside than inside, so after dark with the lights on, people can see in.

Which privacy film lets in the most light?

Frosted films. Madico publishes Frost Matte at 67% visible light on 6 mm clear glass, and XPEL publishes White Frost at 65% on 3 mm glass, so a frosted room stays bright.

Can I frost just the bottom half of a window?

Yes. We cut film to whatever height blocks the sightline you care about, so you keep sky, mountains and treetops in view above it.

Will reflective privacy film pass my HOA?

It depends on your community's rules. Some HOAs limit mirror-like glass on the front of the house, so check first, and we can supply samples and product data for the review.

How do you get privacy window film off?

Lift a corner and peel slowly, using steam or soapy water to soften the adhesive and a plastic scraper for the residue. Bonded films can be stubborn, and when we take off old film before a new install, removal adds $4.50 per square foot.

Can privacy film keep a large view window open while screening a neighbor?

Usually, yes. We frost only the portion of the glass that lines up with the neighbor's window or patio and leave the rest clear, so the view stays and the sightline goes away.

Is privacy film a good alternative to motorized shades on tall glass?

For daytime privacy on glass that is hard to reach, it often is. Film has no hardware or fabric to see, but reflective film loses its effect at night, so rooms used after dark may still want shades.

Free consultation

Book a free window tinting consultation

Tell us about your glass and we'll send a written proposal.

(480) 977-6994
  • Arizona: ROC Lic# 333727

By submitting, you agree to receive calls and texts about your request from Total Protection Films. Msg & data rates may apply. Reply STOP to opt out. See our privacy policy.

Licensed, factory-authorized window film installers

  • Arizona: ROC Lic# 333727
  • Solar Gard / Saint-Gobain authorized dealer
  • Armorcoat authorized installer
  • XPEL authorized dealer
  • Madico SafetyShield qualified dealer
  • Full XPEL VISION line installed
  • 25 years of window film experience

Because we're factory-authorized, film is installed to manufacturer spec and carries the manufacturer's warranty.