Resources
UV Protection Film Resources
Ultraviolet light fades flooring, furniture, artwork and merchandise, and it passes through ordinary glass on cloudy days as well as sunny ones. The films we install are published by their manufacturers as blocking 99% or more of UV.
These articles explain how UV protection works alongside security and solar properties, and how to keep a room bright while protecting what is inside it. Nearly clear films are available when you want the glass to look unchanged.
See UV protection window film for homes and for commercial buildings for the films we install.
UV block and fade reduction are different numbers
Nearly every film we install blocks 99% or more of UV, but manufacturers also publish a separate fade reduction figure, and that number varies a lot more. Solar Gard publishes fade reduction of 95% for TrueVue 5, 72% for TrueVue 30 and 66% for TrueVue 40, all on 6 mm clear glass. The difference comes from visible light and solar heat, which also contribute to fading and which a darker film blocks more of. If you are protecting art, rugs or wood floors, compare fade reduction, not only the UV figure.
Keeping the glass clear
Many homeowners want UV protection without any change to how the windows look. Clear films such as XPEL Clear View Plus 70 (72% VLT on 3 mm glass) and the clear security films (Solar Gard Armorcoat clear at 88% VLT on 6 mm glass) block 99% or more of UV while staying close to the look of bare glass. Clear security film adds a second benefit: it holds broken glass in place. Our clear ceramic grade is $9.00 per square foot installed, and security film starts at $9.50.
Where UV film makes the most difference
Rooms with large glass walls, art collections, hardwood floors and fine fabrics are the usual candidates, along with storefronts where merchandise sits in the window. For films that combine UV protection with impact resistance, read UV protection security window film or see security window film for homes. Our warranty page explains what each manufacturer covers.
Care and warranty
Do not clean the film for 30 days after installation, and expect a slight haze for the first few days while moisture dries out. After that, mild dish soap and water with a soft cloth is all the film needs. Residential warranties on most of the films we install are limited lifetime when an authorized dealer installs them; commercial terms are shorter and vary by film.
For a museum-quality room, the most useful step is to compare a clear film and a lightly tinted one on the same window. The clear film keeps the room exactly as it looks today; the tinted film adds fade reduction and heat rejection. We bring samples of both so you can decide in your own light.
More resources
Free consultation
Book a free window tinting consultation
Tell us about your glass and we'll send a written proposal.
(480) 977-6994- Arizona: ROC Lic# 333727
