Total Protection Films

Security Window Film

Residential Security Window Film

By Chris Fill · Published · Updated

Transparent residential security window film for your home

Residential security window film is a heavy-duty safety film applied to home windows and glass doors so they resist forced entry, hold together when struck, and block harmful UV rays. For families across the Phoenix metro, from Ahwatukee to Arcadia, this security window film delivers peace of mind without changing the look of your windows.

In short: how does residential security window film work?

Residential security window film bonds a thick, tear-resistant polyester layer to the interior of your glass. When an intruder or storm debris strikes the window, the window film keeps the shattered pieces bonded together, turning an easy entry point into a stubborn barrier. Professional installation in the Phoenix area starts at $9.50 per square foot for Armorcoat 8 mil clear.

Common types of home security film

The most common options include anti-shatter safety films that hold glass together, tinted solar-security hybrids that add heat and glare rejection, and thicker films up to 14 mil from leading security window film brands for maximum forced-entry resistance. Each can be matched to the exposure and threat level of a specific window.

How to choose the right home security film

Selecting the proper window film starts with your goal. West-facing windows in Chandler and Tempe benefit from a solar-security hybrid that cuts heat while adding strength. Ground-floor and door glass in Scottsdale and Paradise Valley are best served by thicker anti-shatter window film, ideally paired with a structural attachment system that anchors the window film to the frame for the highest level of break-in protection.

Does residential security window film add privacy?

Yes. Many residential security window film options include a tinted or reflective finish that limits daytime visibility into your home while preserving your outward view and natural light. This adds everyday privacy on top of the core safety benefit.

Clear security film for glass walls and view windows

Most homeowners in Paradise Valley and north Scottsdale want protection they cannot see. Clear security film keeps the architecture intact: Solar Gard lists Armorcoat-Clear 8 mil at 88% visible light transmission on 6 mm glass, and XPEL lists Security Clear 8 mil at 89% on 3 mm glass. The test glass differs, so treat those as each maker's own figure rather than a head-to-head comparison. Both block UV as well (more than 99% for Armorcoat, 99% for XPEL), which helps protect art, rugs, wood floors and fine upholstery near large panes.

Clear security film is not a heat control product. Armorcoat-Clear 8 mil has a published solar heat gain coefficient of 0.79, so a sunny west wall stays nearly as warm as before.

When you want strength and heat control in one film

XPEL makes 8 mil solar security films that combine both jobs. Published figures on 3 mm glass:

  • Clear View Plus 70: 73% visible light, 51% total solar energy rejected
  • Neutral 50: 55% visible light, 41% total solar energy rejected
  • Neutral 35: 38% visible light, 50% total solar energy rejected
  • Silver 15: 15% visible light, 79% total solar energy rejected

A darker or reflective option on a street-facing room adds daytime privacy; a clearer one keeps a mountain view looking natural.

Choosing a thickness

Armorcoat-Clear comes in 4, 7, 8, 10, 11 and 14 mil. XPEL Security Clear comes in 4, 8 and 14 mil, with published break strength of 120, 240 and 420 pounds per inch and puncture strength of 70, 141 and 230 pounds. Thicker film is the usual choice for ground-floor sliders, sidelights next to entry doors and glass facing a quiet side yard.

Anchoring film to the frame

Film alone holds broken glass together, but the pane can still be pushed out of its frame. Madico does not recommend a simple daylight installation of safety film where breakage is a real concern, and pairs its film with attachment systems. Options we install include DOWSIL 995 structural silicone (350 psi published tensile strength), Madico SafetyShield Wet Glaze with at least 1/2 inch of contact on film and frame, and Madico FrameGard, a clamped aluminum extrusion tested to hold 500 to 800 pounds per linear foot. Security film holds broken glass together and slows entry; it does not stop the glass from breaking.

What residential security film costs

  • Armorcoat 8 mil clear: from $9.50 per square foot installed
  • Removing old film first: $4.50 per square foot
  • Upper floor or lift access: adds 15%
  • Thicker films and anchoring: priced per project after an on-site measure

XPEL lists its Security 4, 8 and 14 mil films with a limited lifetime residential warranty when installed by an authorized dealer. See our window film warranty page for how coverage works.

Caring for the film

Do not clean the film for 30 days. After that, use mild dish soap and water or a commercial glass cleaner with a soft cloth, and give your window cleaning service a copy of the care instructions.

Ready To Upgrade Your Windows

Our Security Window Film, Commercial Window Tint and Residential Window Tint installation process is simple, proficient, and respected by a wide variety of clientele in both residential and commercial businesses.

Click Here To Get A Free, No Obligation Consultation

The installation process

Installing home security film follows a proven sequence: inspect and measure each opening, deep-clean the glass, precision-cut the window film, apply a slip solution, squeegee out all moisture, trim the edges, and add an attachment system where specified. A slight haze right after installation is moisture under the film; Solar Gard notes it is normal and usually clears in a few days, depending on the weather. Professional installation protects the warranty and unlocks the window film’s rated performance.

Residential security window film installed on a Phoenix, Arizona home by Total Protection Films

Frequently Asked Questions

Is residential security window film worth it?

Yes. For most Phoenix-metro homes it is a cost-effective way to slow break-ins, protect against monsoon debris, and block UV heat, all for far less than replacing glass.

Can I install home security film myself?

DIY kits exist, but professional installation ensures a bubble-free bond, correct edge sealing, and a valid manufacturer warranty, which are essential for rated security performance.

Does security film darken my windows?

Not necessarily. Clear residential security window film is nearly invisible; tinted versions are optional if you also want heat and glare control.

Protect your home in the Phoenix metro

Ready to strengthen your windows? Compare options in our security window film cost guide, explore commercial window security films for your business, or start with our security film installation service. Total Protection Films serves homes across the entire Valley.

Total Protection Films sales representative ready to answer window film questions

talk with our sales team

We’re here for all your home window film needs! If you have any questions, just ask!

Call Us Today

(480) 977-6994

Request a Quote

Chris Fill, owner of Total Protection Films

Written and reviewed by

Chris Fill, Owner, Total Protection Films

Chris Fill has spent 25 years in the window film business and is a licensed glazing contractor in Arizona.

  • 25 years in the window film business
  • Licensed glazing contractor, Arizona ROC #333727
  • Solar Gard / Saint-Gobain authorized dealer
  • Armorcoat authorized installer
  • XPEL authorized dealer
  • Madico SafetyShield qualified dealer
  • LinkedIn

Free consultation

Book a free window tinting consultation

Tell us about your glass and we'll send a written proposal.

(480) 977-6994
  • Arizona: ROC Lic# 333727

By submitting, you agree to receive calls and texts about your request from Total Protection Films. Msg & data rates may apply. Reply STOP to opt out. See our privacy policy.