Resources
Decorative Window Film Resources
Decorative window film changes how glass looks without replacing the glass. Frosted finishes, patterns, gradients and etched-glass effects add privacy and style. It is common on glass doors, sidelights, bathroom windows, office partitions and storefronts.
These articles cover where decorative film works, how it is installed and how it compares with replacing glass. Decorative and frosted films start at $8.25 per square foot installed.
See decorative window film for homes and for commercial buildings.
Choosing a finish
Decorative films range from almost clear to fully opaque. XPEL Dusted Crystal keeps 86% of visible light (on 3 mm glass) and adds a light etched texture. Madico Frost Matte (67% VLT on 6 mm glass) and XPEL White Frost (65% VLT on 3 mm glass) give a classic sandblasted look that blurs the view while the room stays bright. Patterns, bands and gradients let you frost only part of a pane, for example a band at eye level across a conference room wall.
In high-end homes, decorative film is often used where replacing glass would mean removing custom doors or disturbing finished stone and millwork: shower enclosures, entry sidelights, wine rooms and glass-front cabinets. In offices, it marks glass walls so people do not walk into them and gives conference rooms privacy without closing them off.
Durability and warranty
XPEL warrants its decorative films for 5 years, residential and commercial. Decorative film is installed on the inside of the glass, cleaned with mild soap and water and a soft cloth, and should not be cleaned for 30 days after installation. If the film needs to change later, it can be removed; old film removal is $4.50 per square foot.
For examples of where it fits, read glass door tinting in Scottsdale. For frosted film in offices, see frosted window film. Our warranty page covers terms for every film we install.
Decorative film or new glass
Replacing a glass panel with etched or obscure glass means ordering custom glass, removing the old pane and resealing the frame. Film goes onto the glass you already have, usually in a single visit, and the room is usable the same day. It is also reversible: if you redecorate or sell, the film can come off and a new pattern can go on. Real etched glass cannot be undone.
Decorative film also blocks some solar energy and UV, though not as much as a dedicated solar film. XPEL White Frost blocks 99% of UV on 3 mm glass, while Dusted Crystal, a lighter texture, blocks 35%. If fading of floors or furnishings is a concern in a sunny room, ask about pairing a clear UV film on the remaining panes.
When we measure, we note where each pattern should start and stop so bands line up across adjacent panes and doors. Lining up a frosted band across a run of glass walls is the detail that makes decorative film look built in rather than added later.
More resources
Free consultation
Book a free window tinting consultation
Tell us about your glass and we'll send a written proposal.
(480) 977-6994- Arizona: ROC Lic# 333727
