Total Protection Films

Resources

Anti-Glare Film Resources

Glare makes screens hard to read and rooms uncomfortable to sit in, especially in rooms facing the low morning or afternoon sun. Anti-glare window film cuts the brightness coming through the glass while keeping the view.

These articles explain how glare reduction relates to visible light transmission, and how anti-glare properties combine with security and solar film so one product can solve more than one problem.

See anti-glare window film for homes and for commercial buildings for the films we install.

How glare reduction is measured

Glare reduction is published as a percentage, and it tracks closely with visible light transmission: the less light a film lets through, the more glare it cuts. XPEL publishes glare reduction for every film in its line on 3 mm glass. Clear View Plus 40 cuts glare by 53%, Clear View Ceramic 35 by 61%, and Dark Neutral 15 by 86%. Madico publishes 58% for Optivision 35. Solar Gard publishes visible light figures for TrueVue and Panorama rather than a glare number, so compare those films on VLT.

Picking a level

Most rooms do not need the darkest film. A home office or media room with a single west window may be comfortable at 35 to 40% VLT, while a glass wall facing the afternoon sun over a pool may call for something darker. Because darker films also change how the room looks at night and from outside, we bring samples to try on your glass. A home built around its views often does best with a ceramic film that cuts glare while keeping the color of the view neutral.

Combining glare control with other goals

Anti-glare film is usually a solar film too, so it cuts heat and blocks 99% or more of UV at the same time. Tinted security films such as XPEL Security 8 mil Neutral 35 add glass retention on top of glare control. Installed prices start at $8.25 per square foot for solar control film and $11.50 for darker ceramic.

For more, read anti-glare security film, see solar window film for homes, or check the residential window tinting cost guide.

What to expect after installation

Film looks slightly hazy for the first few days while moisture under it dries out; that is normal and usually clears within a few days depending on the weather. Do not clean the film for 30 days after installation. After that, mild dish soap and water with a soft cloth or paper towel is all it needs, and commercial glass cleaners are fine. Give your window cleaner a copy of the care instructions so nobody takes a razor or abrasive pad to filmed glass.

Residential warranties on most of the solar films we install are limited lifetime, provided an authorized dealer installs them. On commercial buildings the terms run 10 to 15 years depending on the film, so an office project should compare warranty terms alongside glare numbers.

Free consultation

Book a free window tinting consultation

Tell us about your glass and we'll send a written proposal.

(480) 977-6994
  • Arizona: ROC Lic# 333727

By submitting, you agree to receive calls and texts about your request from Total Protection Films. Msg & data rates may apply. Reply STOP to opt out. See our privacy policy.